67 Brake Line Clip Help!

johnny mac 1967 · Sep 29, 2012

I'm currently replacing my brake lines in the car and the original line from front to rear seems to be held in place with little 1/4 inch headed screws and a clip with 2 humps in it. I purchased a complete kit from Matt's and the clips that came in the kit are all held in place with what looks like a 3/8's bolt?
What do I do??
Thanks!

blu7371fish · Sep 29, 2012

I am either going to clean up my original screws and use a washer, or go to the hardware store and get new ones...

rogerh · Sep 29, 2012

I believe this is a picture of the clip your talking about. This was before my restoration and is original screw and clip. Looks like a 5/16" hex head #8 self taping screw.

Roger

KevinK7 · Sep 29, 2012

...I believe this is what you're looking for.
This comes with the screw.
http://www.heartbeatcitycamaro.com/store/product/20532/Camaro-Fuel-line-clip-dual-style-67-68-69/

Yes, this states "fuel line clip" however it is used as a brake line clip on the driver side (forward of the leaf perch).

Vintage 68 · Sep 29, 2012

The little 5/16" bolts for those are available at any auto parts store with a DORMAN Selection

Non washer headed bolt is #700-303
Washer headed bolt is #700-311

I buy them all the time - for 'pennies' NOT $$$

johnny mac 1967 · Oct 9, 2012

Thanks for all the replies guys! Thats exactly what I have in Rogers pic.
That kit seems to be complete, but I'll probably just clean mine up.

67 Brake Line Clip Help!

Attachments

Top Contributors this Month

Recommended Communities