Return line fuel filter bracket. AIM pg 279 or A5 of the L35/L34 option. I have a picture of it on mine but cant post the photo.

 

AIM doesn't show a stud there. If you have a photobucket account you can post pics.

 

The only other place I see studs in the manifold is on the back side of the carb with nuts holding the base down.

 

This would be the bolts/studs that attach the intake to the heads.

 

I don't know then because the rest of my intake to cylinder are all head bolts, unless there is somthing down the back side behind the dist that I cannot see.

 

I only find one stud, 3940944. Is this the one?
There are two bolts used for the starter heat shield?

 

May be only one. Thats what I had in there before. NPD kit says it has two for this application. I believe the alluminum intake kit has 4.

 

How long are they?

 

I have the same question; however, I believe the additional stud is only used on the L78 motor. Take a look at the AIM L78 A4. Heartbeat City sells a L78 kit with 2 studs, and the L34/35 iron manifold kit requires 1 stud for the alt. mounting.

 

Thread is over 5 years old.

 

So do you have the answer to my, "I have the same question"? I read the thread, and there was no definitive answer. I didn't know threads had a shelf life....and the kit still comes with 2 studs.